Forum Donations 2024/2025
on October 25, 2024, 09:29:59 am
HI Guys The funds from the last donation effort ran out in July. The hosting cost are €22 a month. Ive created a goFundMe as the paypal pools only last one month. https://gofund.me/1bd89a45Thanks again for your support 
Re: LPFP replacement - Results
Last Poster: ZoliWorks in Mk5 General Area on Yesterday at 06:53:44 pm
Back with an update after driving the car for some time. Cold starts are better than they used to be but I'#039m still losing rail pressure when left overnight.
On the plus side, the water trickling sound that the rear of the car used to make after stopping, is no more. The old pump likely had a failed/failing one way valve so for $100, this was a great refresh/replacement.
Re: Edition 30 powered by RBS
Last Poster: RBS in Members Rides on January 02, 2025, 10:23:41 am
I don’t know if this here is allowed but it may help you guys… So to our forum editors… if it’s not allowed… delete them. Some help with the front suspension for all  [url=https://postimg.cc/dDBfPh8
Re: Which are the right injectors
Last Poster: Bagus in Mk5 General Area on December 31, 2024, 10:54:25 pm
The injectors for the std GTI is 06F906036A. The price from Autodoc isn`t too bad. When I was looking last year I couldn`t find them cheaper than £280 each. Just make sure you don't buy them from ebay as too many dodgy sellers with fake injectors.
Seal kit 06D998907
Xenon indicator bulb holder
Last Poster: Rado16v in Mk5 General Area on December 31, 2024, 02:55:47 pm
Hi, I wonder if anyone'#039s come across this before.
I have factory fit xenon headlights but recently had an incident with a deer. Anyway, bought a used headlight of eBay that I knew had been messed around with but wasn'#039t an issue as I have all the internals.
However, the replacement headlight is missing the indicator bulb holder. I have a good one but wondered
Re: Exhaust light on - P0401 Error Code from reader
Last Poster: slipd in Mk5 General Area on December 30, 2024, 02:02:39 pm
My mechanic couldn'#039t see my car until the New Year and I'#039ve had to use the it a couple of times for short trips - still no issues with the way it drives. Anyway, the warning has just gone out on its own  Could it have been fuel related? I question it because a few days before the warning came on I'#039ll filled the tank up from our local Asda, which I never normal
Re: Number plate light style reversing camera
Last Poster: ZoliWorks in Mk5 General Area on December 30, 2024, 09:38:06 am
Take power from the reversing light but before you feed that power to the camera, run it through a power stabilizer. Otherwise the image will come out with bad signal. The stabilizer units are mostly made in china, are cheap to get, and from my experience, burn out after about a year so dont worry too much about it'#039s placement. Put it under the plastic trunk lid cover and tie it t
Re: Mk7 steering wheel into mk5 gti
Last Poster: drval85 in Cosmetic/Interior Modifications on December 28, 2024, 05:02:55 pm
This thread was a big help, so I thought I’d add my info in case it helps anyone else. nbsp Finally completed my retrofit. Main issue I ran into is a lack of coding info, and the fact that some airbags have 2 ground points and some have 3. nbsp This is for a 3 point airbag. nbsp
CH module
1k8959442 buttons
5G0880201AC Airbag
7E0971584C Harness
Pin5 in
Re: Which brake pads and discs?
Last Poster: mcgc0 in Mk5 General Area on December 26, 2024, 11:33:29 am
Brembo used to be a decent brand until the pads started to be produced by the chinese fuf knows who makes the discs One things for certain they love to rust
Interesting, and a shame at the same time. Drags the brand down. Brembo once the go-to for brakes.
Re: Side Sill Cover
Last Poster: mcgc0 in Mk5 General Area on December 26, 2024, 11:27:53 am
Slow progress so far. UK sill covers I ordered on eBay were non-OEM and are thin grey smooth plastic type that need priming then top/final coat - my fault, I should have checked first. Taking the hit and return posting these.
The LLL part recommended earlier, when I checked availability, replied back to say part # 1K4 853 859 B 9B9 is no longer supported/offered, which i
Wrong steering module for paddles?
Last Poster: flabbymallow in Mk5 General Area on December 25, 2024, 01:13:05 am
Hi everyone,
I bought myself an mk5 r32 steering wheel with paddles and no MFSW to fit to my mk5 gti which has neither paddles or MFSW at the moment.
Throuhg my research I came to the conclusion that I did not need to replace the steering module as it seemed that as long as you had a dsg installed it was possible to recode the module to accept the paddles. Aft
Re: Oil pressure warning & need advice.
Last Poster: NikoG93 in Mk5 General Area on December 21, 2024, 08:25:59 pm
Don’t like shouting out bad news but you’ve said that it’s been sitting. Maybe rod bearings? I would try dumping a few cans of engine flush additives. Make sure there isn’t a double oring on the oil filter housing.
How would rod bearings be affected from vehicle sitting? Nev
Re: Vanilla GTI
Last Poster: MKVASMR in Members Rides on December 21, 2024, 06:27:08 pm
Recently got myself a 🎁#127873 and installed a non res Milltek catback. Really happy how it looks.   This afternoon had some
|
 Users: 1 Guests: 447
|
